Unmanaged Industrial Ethernet Switches

Unmanaged Industrial Ethernet Switches
Home Products Industrial Ethernet Switches Unmanaged Industrial Ethernet Switches

4*10/100/1000Base-T + 1*1000Base-X SFP and 1*10/100/1000Base-T Industrial Ethernet Switch

LT-IS3006G-1GT1GX4GT
Overview & FeaturesSpecificationDownloadOrder information

Overview

 

The SmartByte LT-IS3006G-1GT1GX4GT is the unmanaged industrial grade Ethernet switch with 4-port 10/100/1000-T RJ45 + 1-port 1000Base-X SFP and 1-port 10/100/1000Base-T RJ45. It is featuring with port isolation, flow control, QoS(1-2 ports) and broadcast storm restrain function, which all can be configured by the Dip switch on the top panel.

 

LT-IS3006G-1GT1GX4GT is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse/over-voltage protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory,transportation, oil & gas, chemical,IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.


Features


➢ 4*10/100/1000M RJ45 ports, 1*1000Base-X SFP port and 1*10/100/1000Base-T RJ45 port

➢ DC12~58V input, redundant powersupply with polarity reverse/over-voltage protection

➢ Dip switch function: 1.Port isolation; 2. Flow control; 3. QoS; 4. Broadcast storm restrain

➢ Support 10K Bytes Jumbo frame

➢ Support4KV surge protection and ESD: Air-15kV, Contact-8kV Protection

➢ IP40 fan-less andDin-rail hardware design  

➢ Operation temperature:-40 ℃ ~+75℃

Model No.

LT-IS3006G-1GT1GX4GT

Interface

Fiber port

Copper RJ45 ports

1

5

Ethernet

4*10/100/1000Base-TRJ45

1*1000Base-X SFPand 1*10/100/1000Base-T RJ45

Standard

IEEE 802.310Base-TEthernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-Duplex Flow Control

IEEE 802.3az Energy Efficient Ethernet

Dip Switch

1. Port Isolation

2. Flow control

3. QoS(1-2 ports)

4. Broadcast storm restrain

LED Indicators

P(Power indicator)Green

Off: the device is power off or failed

On: the device power on is normal

S(System indicator) Red 

Off:thechip is normal

On:the chip read/write is unnormal

1-5(Copper ports)

Green indicators

Yellow indicators

Off: ports link down

Off:port speed is 10/100M

On: ports link up

On: port speed is 1000M

Blinking:data on TX/RX

6( Fiber port)Green

Off: ports link down

On: ports link up

Blinking:data on TX/RX

Power parameters

Input voltage

12-58VDC, redundant power input

Input current

0.5A Max

Total power consumption

Full loading ≤5W 

Connector

Removable 4-pin terminal block

Reverse polarity protection

Support

Over-voltage protection

Support

Switching features

Switching capacity

12G

Packet forwarding rate

17.8Mpps

MAC address table

2K

VLAN

4K

Buffer

3M

Forwarding delay

<5us

Jumbo Frame

Support 10Kbytes

MDX/MIDX

Support

Watchdog

Support

Network Topology

Star topology

Support

Bus topology

Support

Tree Topology

Support

Mechanical structure

Case protection

IP40

Installation method

Din-rail

Dimension(W*D*H)mm

30*98*130mm

Weight

0.55kg

Operating environment

Operating temperature

-40℃~+75℃

Storage/transportation temperature

-40℃~+85℃

Relative humidity

5%~95%(non-condensing)

Industrial Standard

Surge protection of power: IEC 61000-4-5  Level 3 (4KV/2KV)(8/20us)

Surge protection of Ethernet ports: IEC 61000-4-5  Level 3 (4KV/2KV)(10/700us)

DIP: IEC 61000-4-11  Level 3(10V)

ESD: IEC 61000-4-2  Level 4(8K/15K)

Shock:IEC 60068-2-27

Free fall:IEC 60068-2-32

Vibration:IEC 60068-2-6

Certification

CCC/CE/FCC/RoHS

Warranty

5 years

LT-IS3006G-1GT1GX4GT datasheet

Model

Description

LT-IS3006G-1GT1GX4GT

10/100/1000Base-T to 1000Base-X unmanaged industrial Ethernet switch with 4*10/100/1000Base-T RJ45 ports, 1*1000Base-XSFP slot and 1*10/100/1000Base-T RJ45,DC12-58V input, redundant dual power supply, Din-rail installation.Fiber port transmission distance depending on the SFP module; Operation temperature: -40℃~+75℃

HomeAboutProductsFactory TourContact